取消
清空記錄
歷史記錄
清空記錄
歷史記錄
??1.產品概述 / Product Overview
??工業級SVG是我公司引進美國技術針對工業應用環境開發的無功補償裝置,模塊結構采用立式設計。功率組件采取大容量英飛凌IGBT,器件額定功率選值大于有效值的3倍以上,留有足夠大的安全余量,在負載較大沖擊下,能長期工作。模塊采取軸流風機散熱,風量大,風壓足,散熱好; 整柜采取下進上出風模式,整柜頂部采用軸流風機抽風,底部采取防塵百葉窗進風,可較大程度隔離外部灰塵,能適合高溫工業現場及環境惡劣尤其粉塵較大的場合應用。例如:粉體廠、粉石廠、瓷磚廠、水泥廠、鋼鐵冶煉等。
??Industrial SVG is a reactive compensation device developed by Armat introducing American technology for industrial application environment. The module structure is ofvertical design. Infineon large-capacity IGBT is adopted for the power module, and the rated power of the device is more than 3 times the effective value. SVG has an enough safety margin, and can work for a long time under the impact of large load. The module uses the axial flow fan for heat dissipation, with high air flow, sufficient air pressure and good heat dissipation. The whole cabinet adopts the lower air inlet and upper air outlet mode, the axial flow fan is used at the top of the whole cabinet for air draft, and the dustproof shutter is used at the bottom of the whole cabinet for air intake, which can isolate the external dust to a greater extent and be suitable for the high temperature industrial site and harsh environments, especially the environments with much dust, such as powder factory, powder stone factory, ceramic tile factory, cement factory, Iron and steel smelting and so on.
??2.工作原理 / Operating Principle
??工業級靜止無功發生器(簡稱SVG)是利用可關斷大功率電力電子器件(如IGBT)組成自換相橋式電路,經過電抗器并聯在電網上。適當?shù)卣{(diào)節橋式電路交流側輸出電壓的幅值和相位,就可以使該電路吸收或者發出滿足要求的無功電流,實現動態無功補償?shù)哪康摹?/span>
??Industrial static var generator (SVG) uses the high-power power electronic device (such as IGBT) which can be turned off to form a self-commutation bridge circuit to be connected to the power grid in parallel through reactors. By properly adjusting the amplitude and phase of the output voltage at the AC side of the bridge circuit, the required reactive current can be absorbed or emitted by the circuit to achieve the purpose of dynamic reactive compensation.
??3.型號說明 / Model Description
??4.工業級SVG常用選型表/ General selection table for industrial SVG
??5.技術參數 / Technical Parameters
項目 Item |
項目描述 Item Description |
|
電氣規格 Electrical Specifications |
輸入線電壓 Input line voltage |
380V或690V(-40~+20%) 380V or 690V (-40 ~ +20%) |
相數 Phase number |
3相4線;3相3線 3-phase 4-wire; 3-phase 3-wire |
|
頻率 Frequency |
50/60±5Hz(可設置) 50/60±5Hz (configurable) |
|
補償容量 Compensation capacity |
100kvar/150kvar (根據機型) 100kvar/150kvar (according to model) |
|
并聯運行 Parallel operation |
不限 Unlimited |
|
模塊功耗 Module power consumption |
<2.5kW |
|
效率 Efficiency |
高達92%-98% Up to 92%-98% |
|
CT變比范圍 Range of CT transformation ratio |
150:5~6000:5 |
|
通信接口 Communication interface |
干接點 Dry contact |
1個EPO One EPO |
通信 Communication |
RS485通訊接口,采用MODBUS遠程通訊協議。 RS485 communication interface, using MODBUS remote communication protocol. |
|
環境規格 Environment specifications |
使用場所 Application |
室內,不受陽光直曬,無塵埃,腐蝕性、可燃性氣體,油霧、水蒸汽、滴水或鹽份等 Indoor, free from direct sunlight, dust, corrosive, flammable gas, oil mist, water vapor, water drop or salt, etc. |
工作海拔 Altitude |
低于1500米,高于1500米時降額使用。 Lower than 1500 meters. Derate if the altitude is higher than 1500 meters. |
|
存儲溫度 Storage temperature |
-20℃~ +70℃ |
|
工作溫度 Operating temperature |
-45℃~ +55℃ |
|
濕度 Temperature |
小于95%RH,無水珠凝結 Less than 95% RH, no condensation |
|
振動 Vibration |
小于5.9米/秒2(0.6g) Less than 5.9 m/s2 (0.6g) |
|
結構 Structure |
防護等級 Level of protection |
IP20 |
顏色 Color |
白色(可定制) White (customizable) |
|
尺寸 Size |
見下節(根據機型) See the following section (according to model) |
|
冷卻方式 Cooling mode |
風冷(大功率軸流風機) Air cooling (high-power axial flow fan) |
??1.產品概述 / Product Overview
??工業級SVG是我公司引進美國技術針對工業應用環境開發的無功補償裝置,模塊結構采用立式設計。功率組件采取大容量英飛凌IGBT,器件額定功率選值大于有效值的3倍以上,留有足夠大的安全余量,在負載較大沖擊下,能長期工作。模塊采取軸流風機散熱,風量大,風壓足,散熱好; 整柜采取下進上出風模式,整柜頂部采用軸流風機抽風,底部采取防塵百葉窗進風,可較大程度隔離外部灰塵,能適合高溫工業現場及環境惡劣尤其粉塵較大的場合應用。例如:粉體廠、粉石廠、瓷磚廠、水泥廠、鋼鐵冶煉等。
??Industrial SVG is a reactive compensation device developed by Armat introducing American technology for industrial application environment. The module structure is ofvertical design. Infineon large-capacity IGBT is adopted for the power module, and the rated power of the device is more than 3 times the effective value. SVG has an enough safety margin, and can work for a long time under the impact of large load. The module uses the axial flow fan for heat dissipation, with high air flow, sufficient air pressure and good heat dissipation. The whole cabinet adopts the lower air inlet and upper air outlet mode, the axial flow fan is used at the top of the whole cabinet for air draft, and the dustproof shutter is used at the bottom of the whole cabinet for air intake, which can isolate the external dust to a greater extent and be suitable for the high temperature industrial site and harsh environments, especially the environments with much dust, such as powder factory, powder stone factory, ceramic tile factory, cement factory, Iron and steel smelting and so on.
??2.工作原理 / Operating Principle
??工業級靜止無功發生器(簡稱SVG)是利用可關斷大功率電力電子器件(如IGBT)組成自換相橋式電路,經過電抗器并聯在電網上。適當?shù)卣{(diào)節橋式電路交流側輸出電壓的幅值和相位,就可以使該電路吸收或者發出滿足要求的無功電流,實現動態無功補償?shù)哪康摹?/span>
??Industrial static var generator (SVG) uses the high-power power electronic device (such as IGBT) which can be turned off to form a self-commutation bridge circuit to be connected to the power grid in parallel through reactors. By properly adjusting the amplitude and phase of the output voltage at the AC side of the bridge circuit, the required reactive current can be absorbed or emitted by the circuit to achieve the purpose of dynamic reactive compensation.
??3.型號說明 / Model Description
??4.工業級SVG常用選型表/ General selection table for industrial SVG
??5.技術參數 / Technical Parameters
項目 Item |
項目描述 Item Description |
|
電氣規格 Electrical Specifications |
輸入線電壓 Input line voltage |
380V或690V(-40~+20%) 380V or 690V (-40 ~ +20%) |
相數 Phase number |
3相4線;3相3線 3-phase 4-wire; 3-phase 3-wire |
|
頻率 Frequency |
50/60±5Hz(可設置) 50/60±5Hz (configurable) |
|
補償容量 Compensation capacity |
100kvar/150kvar (根據機型) 100kvar/150kvar (according to model) |
|
并聯運行 Parallel operation |
不限 Unlimited |
|
模塊功耗 Module power consumption |
<2.5kW |
|
效率 Efficiency |
高達92%-98% Up to 92%-98% |
|
CT變比范圍 Range of CT transformation ratio |
150:5~6000:5 |
|
通信接口 Communication interface |
干接點 Dry contact |
1個EPO One EPO |
通信 Communication |
RS485通訊接口,采用MODBUS遠程通訊協議。 RS485 communication interface, using MODBUS remote communication protocol. |
|
環境規格 Environment specifications |
使用場所 Application |
室內,不受陽光直曬,無塵埃,腐蝕性、可燃性氣體,油霧、水蒸汽、滴水或鹽份等 Indoor, free from direct sunlight, dust, corrosive, flammable gas, oil mist, water vapor, water drop or salt, etc. |
工作海拔 Altitude |
低于1500米,高于1500米時降額使用。 Lower than 1500 meters. Derate if the altitude is higher than 1500 meters. |
|
存儲溫度 Storage temperature |
-20℃~ +70℃ |
|
工作溫度 Operating temperature |
-45℃~ +55℃ |
|
濕度 Temperature |
小于95%RH,無水珠凝結 Less than 95% RH, no condensation |
|
振動 Vibration |
小于5.9米/秒2(0.6g) Less than 5.9 m/s2 (0.6g) |
|
結構 Structure |
防護等級 Level of protection |
IP20 |
顏色 Color |
白色(可定制) White (customizable) |
|
尺寸 Size |
見下節(根據機型) See the following section (according to model) |
|
冷卻方式 Cooling mode |
風冷(大功率軸流風機) Air cooling (high-power axial flow fan) |